Page 2
This manual deals specifically with the
Installation, Safety, Maintenance, Installer De-
tails, Service and Warranty
aspects of your new Defy Stove. It should be read in con-
junction with the separate instruction handbook supplied.
Introduction
Unpacking
Instructions for the installer
•
Please ensure that packaging material is disposed of in a responsible manner.
•
Plastic bags should be cut up to prevent children playing with them and acciden-
tally suffocating.
•
If the appliance is damaged in any way, do not use it. Report the damage to your
dealer, who will take the necessary corrective action.
1 2
O Seal
Clamp
REGULATOR
Caution: Never use a naked flame to check for gas leaks
•
Check for gas leaks after installation and whenever a new or re-filled gas bottle is
used for the first time.
•
Ensure that the control knobs on the hob are in the OFF position.
•
Open the valve on the Gas bottle.
•
Using a small paint brush, apply some soapy water to all the connections.
•
If there is a leak, bubbles will appear.
•
If this happens, close the valve on the gas bottle.
•
Check and tighten the connections immediately.
•
Repeat the procedure to ensure that there are no further leaks.
Electrical installation
•
Insert the fitted 15A. -3pin moulded plug into a 15A. earthed wall socket.
•
This appliance must be earthed. The manufacturer and the seller do not accept re-
sponsibility for any damage due to incorrect installation or electrical connection.
LPG (Liquid Petroleum Gas) Installation
•
The installation must conform with the requirements of SANS 10087-1.
•
Soak the end of the plastic hose in hot water to soften it and then push the hose end
fully over the hose nozzle. (See sketch 1 below)
•
Secure the hose by tightening the hose clamp. ( See sketch 2 below)
•
Similarly, secure the other end of the hose to the regulator on the gas bottle.
Содержание DGS 150
Страница 7: ...Page 7 Notes...
