Page 14
Maintenance and cleaning
6
Cleaning the air filters
1. Clean the air filters at least once in every two weeks. Before cleaning, be sure to stop the
operation of the appliance and pull out the plug from the wall socket.
2. If the filters are blocked and are not cleaned then the efficiency of the air conditioner
will be reduced.
3. Wash the filters in clean water and leave them to dry in the shade.
Note:
Do not run the appliance without filters.
Cleaning the appliance
1. Wipe the surface of the appliance with a soft moist cloth and then wipe it again with a
soft dry cloth. (Do not use benzene, solvent or any other chemical products).
2. Don’t spatter water into the appliance.
Warning:
In order to avoid an electric shock, always power off the air
conditioner and pull out the plug from the wall socket before cleaning, maintenance
or repairs.
Warning:
Do not attempt to maintain or repair the appliance yourself. Only
authorised agents are to carry out repairs.
Clean the filter screen
If the filter screen is clogged with dust, and the effectiveness of the air conditioning is reduced,
be sure to clean the filter screen once every two weeks.
Clean the upper filter screen frame
1) Clasp the wedging block of the EVA filter screen frame with hands. Push down from the
outside to remove the EVA filter screen frame. Unscrew four screws fixing the EVA filter screen
and the rear housing to remove the EVA filter screen (as shown in the above figure) .
2) Put the EVA filter screen into warm water with neutral detergent (about 40ºC) and dry it in
the shade after rinsing clean.
Clean the lower filter screen frame
1) Hold the handle of the CON filter screen frame, and pull it outward gently to remove it.
2) Put the CON filter screen into warm water with neutral detergent (about 40ºC) and dry it in
the shade after rinsing clean.