Page 10
Control panel
1:
When the machine is powered on for the first time, the buzzer will sound, the machine will
go into standby status.
2: Power Key:
Press this key to switch the machine on and off.
3: Mode Selection Key:
In the case of power on, press the key to switch between cooling
ĺ
dehumidification
ĺ
fan
ĺ
heating
ĺ
cooling
ĺ
mode.
4: Up Key and Down Key:
Press these keys to change the temperature setting or setting
time, operate as follows:
While setting temperature, press the up or down key to select the required temperature (not
available in fan or dehumidifying mode).
While setting time, press the up or down key to select the required time.
5: Fan Speed Selection Key:
In cooling and fan mode, press this key to select high or low fan speed. Under anti freeze
conditions, the unit may not run according to the set fan speed. In the dehumidifying mode, this
key is non functional and the fan will default to low fan speed operation.
6: Timing Key:
In the case of power on, press the key to end timing; in the case of power off, press the key to
start timing. When the timing symbol flashes, press the up and down key to select the required
timing value.
Timing values can be set from1-24 hours. The timing value is adjusted in hourly increments.
7: Sleep Mode:
In the cooling Mode, Press the UP and Fan Key to switch on sleep mode, the unit will then
operate in energy saving and quiet mode.
5
Sleep mode cannot be activated in the dehumidifying or fan mode.
The compressor will switch off when the inner unit chassis is full of water. The
water full Lamp will turn on and buzzer will alarm for several second,