PRO-TC-MAN-17V01 (0802)
Copyright © 2017 Define Instruments
13
6
INPUT SETUP & CALIBRATION
6.1 - Enter F1 PIN number
A
Enter the calibration mode by pressing the
button.
_ _ _ ENTER F1 PIN NUMBER
scrolls across the display and toggles with
0
. Use
the
and
buttons to enter your security code (factory default 1). Then
press
. If the correct PIN is entered, setup is started at 6.2.
If an incorrect PIN number is entered,
_ _ _ INCORRECT PIN – ACCESS DENIED
scrolls across the display and it returns to normal operating mode.
You will have the opportunity to change your PIN number at the end of this section
(6.8). If you have forgotten your PIN number, see Section 9.
6.2 - Input setup
A _ _ _ INPUT SETUP
scrolls across the display and toggles with
SKIP
. Press
to
skip to 6.3, or the
button and then
to
ENTER
input setup.
B _ _ _ MAINS FREQUENCY
scrolls across the display and toggles with the current
selection. Use the
and
buttons to select
50HZ
or
60HZ
, and press
.
C _ _ _ SENSOR TYPE
scrolls across the display and toggles with the currently
selected sensor type. Use the
and
buttons to select
J TYPE
,
K TYPE
,
R
TYPE
,
T TYPE
or
N TYPE
, and then press
.
D _ _ _ NUMBER OF SENSORS
scrolls across the display and toggles with the
current selection. Use the
and
buttons to select how many of the 4 tem-
perature channels are connected. Then press
.
Channels are assigned sequentially. I.e. Selecting 2 CH will use channels 1–2; 3 CH will use chan-
nels 1–3, etc. See 3.2 for wiring.
E
_ _ _ TEMPERATURE SCALE
scrolls across the display and toggles with the cur-
rent scale. Use the
and
buttons to select
DEG C
(°C) or
DEG F
(°F), and
then press
.
