9
HOMEDEPOT.COM
Please contact 1-866-308-3976 for further assistance.
Operation (continued)
3
Downloading the mobile app
Ƒ
Download the Notifi™ mobile app. Search for
the “Notifi Video Solutions” app.
Ƒ
iOS Devices – Download the app from the
App Store
SM
.
Ƒ
Android Devices – Download the app from
the Google Play™ store.
4
Connecting the light to the
mobile app
NOTICE:
The network password will be required to complete this
process.
Ƒ
Ensure the power to the light is turned ON.
Allow 60 seconds for system boot-up.
Ƒ
On the mobile device, go to
Settings > Wi-Fi
and select “Notifi_Video_SecurityXXXX”
(“XXXX” represents the unique MAC address
of each light fixture) from the available Wi-Fi
networks.
Ƒ
Once connected, open the Notifi app. The app
will detect the new light.
Ƒ
Select “Yes” to start the setup and the app will
guide you through the remaining steps.
NOTE:
When creating a new Notifi account, the username
and password must be a minimum of 4 characters and a
maximum of 12 characters. Alpha-numeric and/or special
characters may be used.
5
Viewing live video
The Notifi app provides live-stream video from the
camera to a mobile device.
Ƒ
Tap the name of the camera to be viewed.
Ƒ
While in the live-stream screen, the following
options are available:
Ƒ
Tap the video camera icon (
) to start
recording live video. Tap again to stop
recording.
Ƒ
Tap the camera icon (
) to save a still
image from the live-stream video.
Ƒ
To return to the main app screen, tap the (
)
or “Back” button in the top left corner.
NOTE:
All videos and images will be saved to the mobile
device currently being used to view the live-stream video.
6
Understanding the motion
detection process
This light has dual motion detection technologies.
Ƒ
The light is controlled by a 180° PIR (passive
infra-red) sensor. This sensor detects a
temperature difference moving in front of it.
When motion is detected after dark, the light will
come on at the selected “Full Bright Intensity”
level.
Ƒ
The camera uses both the 180° PIR sensor as
well as a 100° image sensor located within the
camera software. The camera’s image sensor
will not activate unless the PIR sensor first
detects a moving temperature difference within
the detection zone. The camera will record
motion day or night.
