7 HOMEDEPOT.COM
Please contact 1-866-308-3976 for further assistance.
Installation (continued)
6
Mounting the light fixture
NOTICE:
The two pins on the rear of the light fixture must be
inserted into the terminal block for the light to work.
□
Slide the light fixture (B) onto the mounting
plate (D).
□
Tighten the two decorative screws (CC)
securely. Do not overtighten.
NOTICE:
When attaching this light to an external, surface mount
junction box, caulk around the inside of the light fixture (B) before
attaching to the mounting plate (D).
Bla
ck
No
ir
Ne
gro
L
N
Wh
ite
Bla
nc
Bla
nco
7
Caulking around the light
fixture
□
Caulk around the mounting plate (D) and
mounting surface with silicone sealant (not
included).
Operation
1
Adjusting the lamp heads
WARNING:
Risk of fire. Keep the lamp heads at least
2 in. (51 mm) from combustible materials.
CAUTION:
Keep lamp heads 30° below horizontal to
avoid water damage and electrical shock.
□
Turn the power on at the circuit breaker or fuse
and turn on the wall switch.
□
If needed, gently grasp the lamp heads (A) and
tilt them up or down or side to side to adjust
the light coverage area.
D
CC
D
D
B
B
A