Defi ADVANCE ZD, Руководство по эксплуатации

Страница: 97 / 112

4. Each time
R SET
button is pressed, the check of IND.・OUT □ is
switched over. If the check is on, the warning signal is output while the
item is under the condition of warning.
CU・OPR
(slide switch position：
L
)
5. Return the slide switch to
U
or
M
after all the settings are
done.
8 -8.・Error・display
When the sensor wiring is disconnected or short-circuit, the item zone is high-
lighted and OPEN or SHORT is displayed. Once OPEN or SHORT is displayed, the
sign keeps being displayed until ignition is turned off. The short-circuit error dis-
plays for oil pressure and fuel pressure are displayed only during short-circuiting.
The error of sensor wiring that is not displayed on
ZD is displayed and highlighted in multi-display
zone (Zone A5). If there are more than 2 errors
that are not displayed, highlights of OPEN or
SHORT are displayed for 2 seconds each in order.
When a communication error between ZD and
ADVANCE Control unit, Serial line error!! is dis-
played.
Turn the ignition off immediately, and then confirm the wiring of the sensor
and the sensor wire. If any defects are not found, please ask the shop for
inspection.
96