DEFA Solid 712800, Руководство по установке

Страница: 8 / 18

EN
defa.com 8
Installation
DANGER Make sure there is no power in the cable during the installation.
WARNING If the charger or charging cable is damaged, the installation should
immediately be discontinued or, if the charger is already installed, it should be taken out
of operation. No additional use of the charger is permitted in this case.
1. Turn the power/fuse off.
2. Check that all parts and tools required for the installation are available.
3. Guide and fix the installation cable to the spot where the charging station will be installed.
– If necessary, find and reveal the cable inlet in the wall bracket. The cable can be
inserted from the top, left, right, or bottom. Make sure that the cable is long enough.
See image in step 6 below for details.
4. Place the wall bracket with a clearance of 55 mm to any obstacles above the installation area.
5. Attach the wall bracket. Use the built-in spirit level to ensure that the wall bracket is installed
at a level angle. Use the four screws delivered with the product. The holes are made for
screws with Ø4.2 mm.
6. Remove the jacket (from A to B) with a length of 140 mm. Strip all single wires with 9-11 mm.