DVS-300
Diver Video System
Operator’s Manual
5
Safety Symbol
In this operator’s manual and on the product, safety symbols are used to communicate important
safety information. This section is provided to improve understanding of these symbols.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to
avoid possible injury or death.
DANGER
indicates a hazardous situation which, if not avoided, could result in death or serious injury.
WARNING
indicates a hazardous situation which, if not avoided, could result in damage to the product or bodily harm.
CAUTION
indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE
indicates information that relates to the protection of property.
This symbol means read the operator’s manual carefully before using the equipment. The operator’s manual contains important information on
the safe and proper operation of the equipment.
This symbol means always wear safety glasses with side shields or goggles when handling or using this equipment to reduce the risk of eye injury.
This symbol indicates the risk of electrical shock.
General Safety Rules
Read all safety warnings and instructions. Failure to
follow the warnings and instructions may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS!
Work Area Safety
●
Keep your work area clean and well lit. Cluttered
or dark areas invite accidents.
●
Do not operate equipment in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Equipment can
create sparks which may ignite the dust or fumes.
●
Keep children and bystanders away while
operating equipment. Distractions can cause
accidents.
DANGER
!
WARNING
CAUTION
Electrical Safety
●
Avoid body contact with earthed or grounded
surfaces. There is an increased risk of electrical
shock if your body is earthed or grounded.
●
Do not expose CCU-10, its batteries, and its
charger to rain or wet conditions. Water that enters
the equipment will increase the risk of electrical
shock.
●
Do not abuse the cord. Never use the cord for
carrying, pulling, or unplugging the power tool.
Keep cord away from heat, oil, sharp edges,
and moving parts. Damaged or entangled cords
increase the risk of electric shock.
●
If operating equipment in a damp location is
unavoidable, use a ground fault circuit interrupter
protected supply to reduce the risk of electric
shock.
●
Keep all electrical connections dry and off the
ground. Do not touch equipment or plugs with wet
hands to reduce the risk of electrical shock.
Personal Safety
●
Stay alert, watch what you are doing, and use
common sense when operating equipment. Do
not use equipment while you are tired or under
the influence of drugs, alcohol, or medication. A
NOTICE
WARNING
