deeplet 16-CH, Руководство пользователя, Страница: 42 / 104

42

Duration – response duration to define at most how long (in seconds) the Alarm Out
relay and the Buzzer will keep being triggered after this alarm input is triggered or
returns to normal . The value ‘-‘ for ‘Forever’.

Goto Preset – to define the preset position to go to for the Focus Camera if this alarm
input is triggered and the Focus Camera is a PTZ camera. For more details about
preset locations, please refer to
Section 5.6. PTZ Control .

Pre-record – to define how long before this alarm input is triggered the Focus Camera
shall be intensively recorded at Pre-record IPS. Please note that the actual pre-record
time may be shorter than the value set if the total size of the pre-record pictures
exceeds the pre-record buffer size of the system.

Post-record – to define how long after this alarm input is triggered or returns to
normal the Focus Camera shall be intensively recorded at Event Record IPS.

Alarm Out – to define which Alarm Output will be triggered when this alarm input is
triggered. Alarm Output Source Setup up to 32 alarm outputs can be selected and the
definitions are similar to alarm inputs.

Buzzer – to activate the internal Buzzer or not when this alarm input is triggered.

Log – to log to event logs or not.

Screen Message – to display the event message on the screen or not.

Notification – to notify mobile phones and/or send the event e-mail to remote
station or not. The mobile phones with alarm notification from the DVR enabled
will be notified, and the e-mail will be sent to the predefined receivers when the
event is triggered.

FTP – to send the recorded event video/audio files to FTP server or not.