manualshive.com logo in svg

Deeplas ENVIROTILE, Руководство по установке, Страница: 26 / 44

Поделиться
Скачать
Deeplas ENVIROTILE Скачать руководство пользователя страница 26

2 6

  |   E N V I R O T I L E   I N S T A L L A T I O N   G U I D E

Deeplas supply the dedicated ventilated full ridge system.

Main ridge cap moulding

Gable end cap moulding

Main ridge cap moulding

Starting at the right hand side of the roof, align and loosely fit the ridge cap mouldings over the ventilated ridge roll by interlocking 

the ridge sections together. At the gable the end cap envelopes the mitred dry verge before interlocking with the end ridge section 

(see illustration).

Lay out and interlock the main ridge sections together loosely along the full width of the 

roof. When correctly aligned permanently fix into place using the bedded batten as a fixture 

point for the 90mm x 6.3mm Stainless Steel Pozi Pan Self Tapping (ENVSCREW90) required 

to permanently fix two ridge sections together. Start the mechanical screw fixing procedure 

from the right hand gable end, using the fixing hole (R) on the apex at each end.
Now cut the left hand ridge cap moulding to length, fit and secure.
At a gable end fit the left hand gable end cap moulding. At an abutment wall cut the ridge 

cap moulding so there is a 2-3mm gap between the flashing and the cut edge of the cap.

If the cut length (L) is less than 

half the length of the ridge cap 

moulding it is recommended that 

you cut two ridge cap mouldings 

and space accordingly.

Gable end cap moulding 

Main ridge cap moulding

Main ridge cap moulding 

cut to suit ridge length

Fixing hole (R)

13. INSTALLING THE RIDGE

13.1

INSTALLING THE RIDGE PRODUCTS

Cut length (L)

Allow 2-3mm gap

Содержание ENVIROTILE













































Отзывы:

Нет отзывов