The PoolScout Camera mounts to the Junction Box cover using four
stainless steel fasteners into pre-drilled holes. Do not install the box cover
and camera until wiring is completed.
PoolScout Camera
Plug one end of the 100’ ethernet cable into a LAN port on the home
network’s router.
Route the other end to the access hole and into the Junction Box.
Plug the ethernet cable into the camera’s ethernet jack. Because this
connection will be housed within the Junction Box, the watertight cover
on the camera’s ethernet jack can be removed and discarded.
You may need to coil up excess cable indoors before permanently installing
at the Junction Box.
When routing is complete, secure the cable along the run using the
supplied cable clips.
9
Ethernet Cable
Installa�on
