Deditec Fan-Control-2, Руководство пользователя

Страница: 12 / 16

Hardware Description | Seite 12
2.4. Configuration of the device
In order to be able to configure the device on the hardware side,
the housing must first be opened. For this purpose, the two
latching lugs on the front side with
with a screwdriver and pull out the rear part of the housing.
Setting the working resistance for the fan
Depending on the type of fan to be controlled, an appropriate
working resistance between operating voltage and signal voltage
is required.
The working resistance of this device can be set between 1K,
2K2, 4K7 and 10KOhm. -> Insert the appropriate jumper next to
the resistor.
Further information can be found in the data sheet of the fan.