51
•
Electrical connection:
—
Connect the power cable from your hob to
your single-phase mains supply (220-240 V
~
).
Refer to the section “
Connecting to the
electricity supply
”.
•
Check the type of gas supplied
—
Select touch control
. Whilst keeping
your finger on this control, press touch control
(Fig. 01).
An audible signal confirms your selection.
Within the following 5 seconds,
—
Press touch control
twice (Fig. 02).
An audible signal confirms your selection.
The back right zone display indicates the type
of gas selected.
“1 GAS”
F
OR NATURAL GAS
(Fig. 03)
“2 GAS”
F
OR BUTANE/PROPANE
(Fig. 04)
—
To change the gas supply type, use the
“power slider”, sliding your finger to the left or
to the right.
The gas supply type is confirmed
automatically after 5 seconds.
(Fig. 05).
Y
OUR HOB IS READY FOR USE.
EN
2
2 // INSTALLING YOUR APPLIANCE
Fig. 01
Fig. 02
Fig. 03
Fig. 04
Fig. 05
