34
1 / INSTALLING YOUR APPLIANCE
•
•
CHOICE OF LOCATION
Your appliance shoud be flush mounted in the
surface of a support cabinet that is a minimum of
3 cm thick, made of a material that resists heat or
that is covered with such a material.
If a horizontal divider wall is positioned under the
hob, it should be placed between 10 cm and 15 cm
away from the top of the work surface. Never store
aerosol cans or pressurised containers in any
compartment that may exist under the hob (see
chapter
“Safety instructions”).
BEFORE INSTALLATION
of your applicance and to ensure leaktightness
between the drawer unit and the work surface,
make sure that you glue the seal provided in the
plastic bag
(Fig. 02).
—
— Remove the pan supports, the burner covers and
burner heads; noting their positions.
—
— Turn the hob over and carefully place it on top of
the opening in the cabinet so as not to damage the
knobs and spark plugs.
—
— Glue the foam seal, supplied with the appliance,
tto
o tth
he
e o
ou
utts
siid
de
e e
ed
dg
ge
e o
off tth
he
e ffrra
am
me
e. This seal ensures
leaktightness between the glass and the work
surface.
—
— Place your hob in the opening of the support unit,
carefully centering it in the cut-out.
—
— Reposition the pan supports, burner covers and
burner heads.
—
— Connect the hob’s power cable to your kitchen’s
electricity supply (see section “E
Elle
ec
cttrriic
c
c
co
on
nn
ne
ec
cttiio
on
n”).
—
— Connect your appliance to the gas supply (see
section “G
Ga
as
s c
co
on
nn
ne
ec
cttiio
on
n”).
•
•
48 cm mini
3 cm mini
6 cm mini
6 cm mini
56 cm / 26,5 cm
5,3 cm mini
70 cm mini
Fig. 01
Fig. 02
Housing
Seal
APPLIANCE
Standard
cabinet
cut-out
Standard
cabinet
cut-out
Total
dimensions
above
the work
surface
Total
dimensions
below
the work
surface
Width
56 cm
26.5 cm
71 cm
31 cm
55.4 cm
26 cm
Depth
49 cm
49 cm
52.2 cm
51 cm
47 cm
47 cm
Thickness
depending
on
cabinet
depending
on cabinet
5 cm
5 cm
5.1 cm
5.1 cm
Model
60 cm
30 cm
60 cm
30 cm
60 cm
30 cm