32
•
Gas supplied by tank or cylinder
(butane/propane)
For your safety, you must choose from the
three following connection options:
— Connection with a rigid pipe
made from
copper and with screw-on mechanical con-
nectors (G1/2 gas standard mark). Make the
connection directly to the end of the elbow fit-
ted on the appliance.
— Connection with a wavy metal hose
(stain-
less steel)
with screw-on mechanical
con-
nectors (compliant with the NF D 36-125 stan-
dard) whose service life is unlimited
(Fig. 01).
— Connection with a reinforced rubber
hose
with screw-on mechanical
connectors (com-
pliant with the NF D 36-112 standard) whose
service life is 10 years
(Fig. 02).
Fig. 01
Fig. 02
Fig. 03
A
B
Gasket
Adaptor (not provided)
Clamp (not provided)
C
Tip
You can obtain the adaptor and the sealing
washer from your After-Sales Service
Department.
Warning
Screw on the adaptor with a torque
not exceeding 25 N.m.
Dans une installation existante, un tube sou-
ple équipé de ses colliers de serrage (confor-
me à la norme XP D 36-110) dont la durée de
vie est de 5 ans peut être utilisé. Il est néces-
saire dans ce cas d’utiliser un about sans ou-
blier de mettre en place un joint d’étanchéité
entre l’about et le coude de la table
(Fig. 03).
A
B
C
EN
2
2 // INSTALLING YOUR APPLIANCE
