DeDietrich DPE7610 Series, Руководство по установке и использованию

Страница: 21 / 24

DAILY CARE OF YOUR APPLIANCE
3.1 - MAINTAINING YOUR
APPLIANCE
Igniters and injectors:
If the igniters become dirty
, clean them
with a small, stiff (non-metallic) brush
(3.1.1).
The gas injectors are located in the centre
of each burner in the well shape. Ensure
that you do not block them during cleaning,
which could impair your hob's performance.
If you do block them, use a safety pin to
unblock the injector
(3.1.2).
Pan holders and gas burners:
For persistent stains, use a non-abrasive
cream, and then rinse with clean water.
Carefully wipe each part of the burner
before using your hob again.
Electric hotplate:
The hotplate is protected with a black
coating; the use of any abrasive product
should be avoided. After each use, wipe it
with an oily rag.
If the plate starts to rust, remove the rust
(with emery cloth, for example) and replace
the black coating with a commercially
available
high temperature renovating
product.
Enamel or stainless steel:
Use a scouring cream to clean the hob's
enamel. Shine using a dry cloth.
Do not allow acid liquids such as lemon
juice, vinegar, etc. to remain on the enamel
.
To clean the hob's stainless steel, use a
sponge and soapy water or a commercially
available stainless steel cleaner.
Your hob will be easier to maintain if
done prior to use. Turn off all electrical and
gas controls.
Preferably clean hob components by
hand rather
than in the dishwasher,
o
do not use scourers to clean your hob,
o
do not use steam cleaners.
29