DeDietrich ALEZIO S V200, Руководство пользователя

Страница: 20 / 40

5.2 Starting and stopping the heat pump
5.2.1 Starting the heat pump
1. Switch on the outdoor unit and the indoor module.
The message "Welcome" will appear on the screen. The heat pump
begins its start-up cycle.
2. If an error message is displayed on the home screen, contact the
installer.
5.2.2 Shutting down the heat pump
The heat pump must be shut down in certain situations, for example
during any intervention on the equipment. In other situations, such as an
extended absence period, we recommend that the Holiday operating
mode is used in order to benefit from the heat pump anti-blocking function
and to protect the installation from frost.
To shut down the heat pump:
1. Switch off the outdoor unit and the indoor module.
5.3 Switching the central heating on/off
The heating function can be switched off for all circuits. This can lead to
energy savings, for example, during the summer period.
Important
If the heating function is shut off, then the cooling will also be shut
off.
1. Select the
23.5
Air Src Heat pump icon.
2. Select CH function on.
3. Select the desired value:
Off to stop the heating function.
On to switch the heating function on again.
5.4 Periods of absence or going on holiday
If you will be absent for several weeks, you can reduce the room
temperature and domestic hot water temperature in order to save energy.
To do this, activate the Holiday operating mode for all zones, including for
domestic hot water.
1. Select the Holiday Mode icon.
2. Set the following parameters:
Tab.14
Parameter Description
Start date holiday Set the date and time for the start of the absence period.
End date holiday Set the date and time for the end of the absence period.
RoomT. Holiday Set the desired room temperature for the absence period
Reset Restart or cancel the holiday programme
5.5 Regional and ergonomic parameters
You can personalise your appliance by modifying the parameters linked to
your geographic location and the ergonomics of the control panel.
1. Press the key.
2. Select System Settings.
Off
5 Operation
20 MIV-4S V200 7682822 - v03 - 27082018