Dedicated Micros CamVu 720, Руководство по установке и настройке, Страница: 29 / 160

29
Installation Guide
System Features Network
Secondary Web Port If the default port setting for web serving has already been allocated,
it is possible to configure a second port number i.e. the secondary web
port can be set to 8000 if the default web port (80) is blocked by the
network or firewall.
Use Record Profiles for Tx High This option sets the Video Transmission profile for the ‘High’ setting
to be identical to the settings (rate/quality/resolution) that are being
recorded.
Auto IP Override This is defaulted to allow zero configuration at the factory. Select
Disable to prevent Zero Config address negotiation.
Max Client Connections This setting limits the number of client connections to the server.
The default value is 256 but could be increased if there is heavy
network traffic.
ARP Cache Size This setting limits the number of cache entries available in the ARP
table. The default setting of 256 is adequate for most instances
TCP Reassembly Queue Limit This setting limits the maximum number of TCP segments allowed in
the reassembly queue, to protect against a common DoS attack.
Remote Codec Default Connection This selects the initial connection type to use for an auto configured
remote codec camera, select from TCP or UDP
System (Red) Select to open the System->Features->System page
Network (Green) Select to open the System->Features->Network page
Video (Yellow) Select to open the System->Features->Video page
Other (Blue) Select to open the System->Features->Other page