manualshive.com logo in svg

Dedicated Micros CamVu 720, Руководство по установке и настройке, Страница: 149 / 160

Поделиться
Скачать
Dedicated Micros CamVu 720 Скачать руководство пользователя страница 149

149

Installation Guide

Appendix C - Unit Specification

IMAGE SENSOR : 

1/3” CMOS progressive scan

VIDEO PROCESSOR : 

SoC DSP (CW5631)

MINIMUM ILLUMINATION 

(all using frame integration) Comparable sensitivity at 10pps - 2.85 lux

CMVU720:  

0.3 lux at F1.2, 

CMVUD720:  

0.3 lux at F1.3,

 CMVUVRD720: 

0.3 lux at F1.3 

SHUTTER TIME : 

1/100s to 1/1s

LENS

CMVU720:

 C/CS with back focus adjustment ring.  Direct drive DC iris via 4-pin square type socket on the side of the 

camera.  1/3” or 1/4” lenses can be used (1/4” ideal for 720p resolutions) 

CMVUD720/CMVUVRD720:

 Integrated 3-10mm 

Varifocal with DC iris, F1.3. Aspherical glass with IR corrective coating

VIDEO SPECIFICATIONS

COMPRESSION : 

JPEG, H.264 and MPEG-4. 

9330

MAXIMUM OUTPUT RESOLUTION : 

720p (16:9 Ratio), 2MP (4:3 Ratio) 

9332

MAXIMUM IMAGE RATE

Maximum 30pps @ 800x600px (single connection to camera) 15pps at up to 1600x1200 (4:3, 2MP) & 1280x720 (16:9, 1MP)

IMAGE STREAMING

Multiple, simultaneous, individual video streams in any supported compression format, bit rate or resolution can be sent to any connected user

TRANSCODING

Transmit multiple simultaneous MPEG-4, H.264 and/or MJPEG recorded image streams to any number of associated NetVu Connected 
devices for image viewing.  Each stream can be tailored to suit bandwidth requirements. Resolution and format can be dynamically changed 
without the need to stop and then restart the stream.  This operation is carried out independently of high resolution recordings.

COMPOSITE VIDEO OUTPUT

(PAL / NTSC) live display, initially operational for 10 minutes (user configurable) to enable camera focusing / configuration. Video output 
can also be used as part of a media display or emergency messaging capability.

INTEGRATED CAMERA RECORDING (ICR)

ICR combines recording capability and a full enterprise video server within the camera. Record camera footage at the unit as well as any 
associated Video Server. An integrated Micro SD expansion port provides local recording capability whilst ATA over Ethernet (AoE) protocol 
provides highly-secure point-to-point transfer of video files to separate, remote, storage devices for backup and longterm archiving. Enables 
a tiered storage architecture that ensures no single point of failure.

IMAGE CONTROL

Camera Title, Lens Select, AWB, Electronic Iris, Exposure Level, Flip/Mirror Video, Sharpness Control

NETWORK & CONFIGURATION SPECIFICATIONS

NETWORK SUPPORT

DCCP, DHCP, HTTP, HTTPS, IPv4, SMTP, Bonjour, ICMP, DNS, NTP, TCP, UPP, UDP, ICMP, DHCP, ARP, RTP, Telnet, FTP, AoE, SNMP, ZeroConf

WEB PAGE CONFIGURATION

Simple Web page configuration will allow the following functions to be configured: Camera setup, Manual update of viewing profiles, 
Network and Alarm settings (CMVUVRD720 includes Audio Settings)

DIRECT CAMERA CONFIGURATION

Directly configure from the associated NetVu Connected Video Server. In addition, when used within a Closed IPTV system, default settings 
(such as streaming rate, resolution, aspect ratio, telemetry, lens configuration etc.) can be automatically assigned to the camera

INTEGRATION SPECIFICATIONS

APPLICATION SUPPORT

Browser:

 IE 5.5 / Firefox 2.0 and above

Developer: Java via Dedicated Micros SDK

Содержание CamVu 720

































































































































































Отзывы:

Нет отзывов