Dedicated Micros CamVu 720 Скачать руководство пользователя страница 150 | Manualshive

Страница: 150 / 160

Dedicated Micros CamVu 720 Скачать руководство пользователя страница 150

150

CamVu 720

NETVU OBSERVER - SEAMLESS VIDEO MANAGEMENT

Dedicated Micros NetVu ObserVer video management software allows seamless viewing and control of live and recorded images from any NetVu
Connected product (IP or analogue) in a single interface. The ability to view multiple sites simultaneously makes management of any security
installation efficient. The inclusion of RVRC (ARC) features such as EDP, event characterisation and report generation make NetVu ObserVer
ideal for remote monitoring of multiple sites. (Supplied with Product, Apple Mac Version Available)

ALARMS & RELAYS

Video Motion Detection (VMD) & Activity Detection, Zoned alarms based on multiple inputs.
On alarm actions include; Alarm Reporting, Record Profile change, Email, Relay Closure (Relay closure on models with relay outputs only)

CMVUVRD720:

2 physical alarm inputs & 1 physical relay output.

AUDIO

CMVUVRD720:

1x audio input (mono) – 3.5mm jack, 47kΩinput impedance, 1x audio ouput (mono) – 3.5mm jack, 47kΩinput impedance

GENERAL SPECIFICATIONS
ENCLOSURE

CMVU720:

Zintec case, Cast Zinc lens mount, V0 ABS trim

CMVUD720:

Grey ABS. Clear polycarbonate bubble

CMVUVRD720:

IP66 Die cast aluminium LM25 Base, Lexan Polycarbonate Bubble

CONNECTIONS

Ethernet: 10/100 BaseT RJ45 Connector PoE
Storage: Micro SD slot for recording. Supplied with 2GB class 4 card.

CMVU720:

Secondary Micro SD slot for recording

Power: Terminal Block

CMVUVRD720:

Terminal Block for Alarms & Relays

MOUNTING OPTIONS

CMVU720:

1/4” 20 UNC mounts on top and bottom

CMVUD720:

Ceiling, Surface (via provided fixings), 3-axis GyroView set up

CMVUVRD720:

Surface (via provided fixings), 3-axis GyroView set up

MEASUREMENTS

CMVU720:

123 (L) x 60 (H) x 60 (W) (mm)

CMVUD720:

120 (L) x 120 (W) x 110 (H) (mm)

CMVUVRD720:

148 (L) x 148 (W) x 104 (H) (mm)

WEIGHT

CMVU720:

0.4kg (14oz) without lens

CMVUD720:

0.3kg (10.5oz)

CMVUVRD720:

1.18kg (41.6oz)

POWER

CMVU720:

12Vdc-24Vac/PoE, Consumption: 4.5W

CMVUD720:

PoE only, Consumption: 4.5W

CMVUVRD720:

12Vdc/PoE, Consumption: 4.5W

POWER OVER ETHERNET

IEEE 802.3-2008. End span and bridging injectors supported.
Supplied with a PoE injector to allow power to be applied to the connecting Ethernet cable without the need for a PoE enabled network switch.
This allows 48V power (supplied seperately) to be provided down the line to the camera on the same cable that is used for data transmission.

9502

ENVIRONMENTAL

Operating Temperature: -10º to +50ºC (14º to 122ºF)
Operating Humidity: 20% to 80% relative humidity, non condensing
Storage Temperature: -10º to +70ºC (14º to 158ºF)
Storage Humidity: 20% to 90% relative humidity, non condensing

«
...
148
149
150
151
152
...
»

Содержание CamVu 720

































































































































































Отзывы:

Нет отзывов