Dedicated Micros CAM18A, Инструкция по эксплуатации

Страница: 19 / 40

13
3.6 Tour
There are 8 programmable Tours. Each Tour consists of up to 42 Preset positions, Patterns,
Scans or other Tours (second-level). Using second-level Tours, it can be expanded to over 300
functions in a single Tour. However second level Tours will be ignored when called by a Tours.
The following example illustrates this concept:
If
Tour1 has Preset1 Î Preset2 Î Tour2 Î Tour3 and
Tour2 has Preset3 Î Preset4 Î Preset5 Î Tour4and
Tour3 has Preset6 Î Pattern 1and
Tour4 has Preset7.
Tour1 executes as follows:
Preset1
Î Preset2 Î Preset3 Î Preset4 Î Preset5 Î Preset6 Î Pattern1 Î
Preset1 Î ... (Repeat)
Tour2 executes as follows:
Preset3 Î Preset4 Î Preset5 Î Preset7 Î Preset3 … Repeat
(Tour4 is still valid if called directly from Tour2.)
xxxxx : 16 digits of title for tour label
=== : blank preset position
SCAN TYPE : Max (Normal)/ Slow V. Scan/ Fast V. Scan
DWELL : 03-99 Sec
003 : Preset 003 (1~240)
A08 : Auto Scan 08 (1~8)
P01 : Pattern 01 (1~4)
T02 : Tour 02 (1~8)
Follow the steps below to program the Tours:
1. Press
PRESET
+
95
to display the main menu on the monitor. Scroll to Tour and push the
Joystick
to the right to enter the Tour menu. Or just press the Tour key on the keyboard
2. Choose an empty location to be programmed by pushing the
Joystick
up, down, right, or
left.
3. To see a stored preset view, use the
Joystick
to move the cursor to a stored position. By
pressing
PRESET
+
93
keys, the camera will move to the stored Preset view.
TOUR 01:xxxxxxxxxxxxxxxx
SCAN TYPE:NORMAL
=== === 003 === === === ===
A08 === === === === === ===
=== T02 === 001 === === ===
=== === === T08 === === ===
=== === === === === === ===
=== === === === === === ===
SAVE AND EXIT(ESC TO CANCEL)
PRESS FUNCTION KEY AND ROTATE
JOYSTICK TO SELECT NUMBER.