11
3.4 Preset
If you need to view specific places routinely, you should program presets. A preset is a
programmed video scene with automatic pan, tilt, zoom, focus and iris settings. Once
programmed, pressing a
PRESET
button and entering the number on your keyboard
automatically calls up the preset. In addition, presets may be assigned to alarm actions or as the
“home” position for the dome camera.
There are three pages of preset menu, each page can hold 80 presets. Pages can be scrolled
by pushing the
Joystick
to the Left or Right on the first or last No. of Preset.
NOTE: In case of the KBS3 keyboard, you can call the preset 1-32, 35-59.
NOTE: When you call the preset number under 10, you should press 0 first. (1: press 0 + 1)
x : 16 digits of title for preset label
= : blank preset position
* : position has the preset
█
: Current cursor position
Follow steps below to store the Preset positions:
1. Press
PRESET
+
95
to display the main menu. Select the Preset option by using the
Joystick
to the right. (Press
PRESET
+
93
to go directly to the Preset menu without going
through the main menu.)
2. Select the blank preset position to be stored by pushing the
Joystick
up, down, right, or left.
3. The position, which is marked with
*
, already has the preset view assigned. To review the
stored preset, press
PRESET
+
93
key on the
*，
The camera will show the stored preset
view.
4. After selecting a blank position, press
PRESET
+
95
, Use the
Joystick
to control the
direction of the camera and lens.
PRESET SETUP
NO. 001: xxxxxxxxxxxxxxxx
FOCUS : AUTO (MANUAL)
IRIS : AUTO (MANUAL)
DWELL : 03 SEC(3~99)
1234567890 1234567890
00
█
***======01==========
02==========03==========
04==========05==========
06==========07==========
JOY-LEFT TO PREV. PAGE
SAVE AND EXIT(ESC TO CANCEL)
