8
en
g
Deda Elementi wheels are designed to use clincher tires with inner tubes or Tubeless
tire. The Tubeless conversion kit is not included into the wheels box. Check tires and
inner tubes dimensions according to the rim technical specifications included in this
user’s manual.
WARNING
: Do not use tubular or tubeless tires with this wheel. The use of non-
compatible tires with this wheel can cause sudden and unexpected loss of pressure,
loss of control and tire failure resulting in serious accident and injury for the user.
Before the tire installation check that rim tape is already installed in the right
position inside the rim; if not please install first the rim tape.
Make sure the rim tape cover all the rim bed holes along the entire circumference
of the wheel.
The valve hole on the rim tape has to be placed at the same position of the valve
hole of the rim wheel (Fig. 1).
Install the tire on the wheel and proceed with tire inflation as per tire manufacturer
recommendations. Never exceed the maximum inflation pressure permitted for
this Deda Elementi carbon rim of 7 bar / 100 psi.
TIRES
Fig 1
Rim tape
Valve hole
WARNING
: for Tubeless tire installation carefully read the instructions of the tire and
tubeless conversion kit of the Manufacturer.
WARNING
: Never exceed the maximum inflation pressure recommended by the
wheels manufacturer as indicated in this user’s manual. Excessive tire pressures
could damage the rim structure resulting in serious accident and injury for the user.
WARNING
: Tire installation requires a specific experience of the product, in case
of doubts please contact an official Deda Elementi dealer or a qualified bicycle
technician. During tire installation, don’t use tools or tire lever that can fold or damage
the rim edge. An incorrect tire installation can cause serious accidents and injury for
the user.
