10
en
g
WARNING:
Since specific experience is necessary for proper wheels installation,
in case of doubts it is recommended that the product be installed by an official
Deda Elementi dealer or a qualified bicycle technician. An incorrect wheels
installation can cause serious accidents and injury for the user.
Insert the quick release into hub so that the lever be on the non drive side of
the wheel and tighten the quick release nut slightly on the opposite side of
the lever. (Note: front quick release is shorter than rear)
Install the front and rear wheel respectively into the fork and frame drop-outs.
Tighten the quick release nut until is in contact with the fork or frame drop-
outs.
Close the quick release lever from the Open to the Closed position; if
necessary adjust the closing force manually through the nut (tightening the
force increases, untightening the force decreases) (Fig. 2).
FITTING THE WHEELS ON THE FRAME
Closed
Open
Fig 2
