USE R M ANU AL
TOUCHSCREEN 2.1
15
SEPTTEMBER 12, 2017
Finally, when system is set in
Service mode
, Factory Settings group, in addition
to listed above, would have Service button (see Service Mode on page 18 for
details).
The last column (right, light-blue buttons) shows menu selection for
Advanced
Troubleshooting
features such as viewing all system
sensors’
readouts, current
controls and sub-system
s’
statuses etc.
In addition, this group has
Tools
menu selection with the following advanced
features (mostly
–
for communication/IT or touch display-related troubleshooting):
Ping Network
Ping network address. Use this feature when
troubleshooting a WebSentry®
®
connection
issue.
Serial Stats
Serial port counters are used for troubleshooting serial port
communication interface. For a robust and stable
connection, you want to see most error counters at 0 or a
very low number compared to the total number of
messages
System Backup
Use this feature to backup all control
settings to the SD
card. You can also use it to restore settings from a backup.
Factory Default
Use this feature to reset settings
to factory default. All
current settings will be lost. Use this feature as a last
resort only, when experiencing strange system behavior.
This can be the result of corrupt control module (sub-
board) memory and restoring to factory defaults should
resolve most memory corruption issues.
Firmware
Update
Use this feature to update touch display firmware. See
Updating Firmware on page 24 for more information.
Navigating Advanced page and adjusting Advanced settings is similar to
described above User setting adjustments (see page 11-12).
Note.
Displayed content depends on the
system’s series software
, configurations
and settings (Advanced). For example, if system is not configured to have a pool
heating, all pool heating related features would not be shown (pool water
temperature setpoint in User menu, Pool water temperature sensor reading in
Readouts, Pool Heat status indicator in Status etc.)
