USE R M ANU AL
TOUCHSCREEN 2.1
11
SEPTTEMBER 12, 2017
User
The
User Settings
page consists of two menus selection columns.
From the left column (dark-blue buttons), you can access user settings like set
points and schedules. You also have the
System Information
button with critical
system control software information that may be required for troubleshooting.
The right column shows you user command options (light-blue buttons), allowing
to start/stop main blower, set and trigger Purge and Spectator modes and, finally,
restart the system or reboot/restart touch display.
Figure 6. User page.
Parameter Adjustment and Command Execution
–
EXAMPLE.
To adjust desired parameter/user setting or execute command, simply press
respective button. Figures 7 and 8 (below), as an example, illustrate the
navigation process for adjusting Room temperature set point; similar navigation
and adjustment procedure could be used for most settings and parameters:
•
On User page, press Setpoint button
–
you’ll
be prompted to User-
Setpoint page (Figure 7):
o
Parameters buttons and their respective current setpoints value
will be displayed (per system current configuration);
o
You can press Back button at any time to return to previous (in
this case
–
User) page.
