DeCrane Aerospace Audio International LCDW-9320-101-x Installation Manual
Document # 540363, Rev A1, 11/2008
Page 15 of 18
If any device is transmitting (i.e., holding bus active), then these typical
measurements would be reversed for the A-to-Ground and
B-to-Ground. This troubleshooting tool can help indicate a data bus
lockup.
If this occurs, remove the data bus from all other equipment
one piece at a time. As each is removed, check the bus status to see if
it is now functioning properly. Once you have removed the piece or
pieces of offending equipment, disconnect power and then reconnect
everything but the suspect component. Reapply power and then test
the functionality of the unit(s).
5.3 Troubleshooting Chart
Problem
Possible Cause
Solution
Poor picture quality or
scrambled video
LCD backlight malfunction
SP-LCD6 programming
Poor video source
•
Contact DeCrane
Aerospace Audio
International
•
Check setup
•
Verify function of
video source
Blank screen*
LCD not receiving power
Mother board malfunctioning
•
Check all cable
connections
•
Contact DeCrane
Aerospace Audio
International
*The monitor displays a black screen with the unit turned on and no video
signal.
6.0 Specifications
6.1
Unit Specifications for LCDW-9320-101-x:
Physical Specifications – LCDW-9320-101-x
Housing
Iridited Aluminum
(with black powder-coat finish)
Screen Size
32" (81.28 cm) diagonal
Weight
Approx. 28.00 lb / 12.70 kg
Dimensions
(l x w x h)
30.24" x 2.50" x 17.91"
76.81 cm x 6.35 cm x 45.49 cm
Note: This does not including optional bezel and bezel mounting bracket.
