DeCrane Aerospace Audio International LCDW-9320-101-x Installation Manual
Document # 540363, Rev A1, 11/2008
Page 11 of 18
3.6
Mating Connector Information
All wiring harnesses to the unit shall be supplied and fabricated by the
installing agency.
J1 CONNECTOR:
PART NUMBER
MATING CONNECTOR
LCDW-9320-101-1
CBC13W3F140000 Female Plug or equivalent
A1 size 8 Contact: FCC4102D (Positronic Industries)
A2 size 8 Contact: 110236 (PIC Wire & Cable)
LCDW-9320-101-2
DBA13W3SF0 Female Plug w/male jackscrews or equivalent
A1 size 8 Contact: D130344 (ITT Cannon)
A2 size 8 Contact: 110236 (PIC Wire & Cable)
J2 CONNECTOR:
J3 CONNECTOR:
PART NUMBER
MATING CONNECTOR
LCDW-9320-101-1
DD15M10JVL0 Male Plug or equivalent
(Positronic Industries)
LCDW-9320-101-2
DAMA15PK87 Male Plug w/ male jackscrews or equivalent
(ITT Cannon)
3.7
Pinout Assignment Descriptions
3.7.1 Pinout assignment for the LCDW-9320-101-x is as follows:
J1
Pin # Description
1
+28VDC Power Input
2
Ground
3
Reserved
4
Monitor Status Gnd Output
5
Monitor On/Off Gnd Input
6*
SE Video Enable*
7*
SE Video Common*
8-10
Reserved
A1
Composite Video
A2
Serial Digital Video
A3
Reserved
* Pins 6 and 7 must be tied together for single-ended Composite Video
sources and should only be connected if a differential video source is not
driving pin A1
.
PART NUMBER
MATING CONNECTOR
LCDW-9320-101-1
RD9M10JVL0 Male Plug or equivalent
(Positronic Industries)
LCDW-9320-101-2
DEMA-9P Male Plug with male jackscrews or equivalent
(ITT Cannon)
