DeCrane Aerospace Audio International, Inc.
LCDP-9084-301-x Installation Manual
Document # 540344, Rev A1, 02/2009
Page 11 of 16
POWER BUTTON
POWER BUTTON turns the unit on or off.
STATUS LED
STATUS LED lights up green when power is activated.
5.0
Instructions for Continued Airworthiness
No
periodic scheduled maintenance or calibration is required for continued
airworthiness of the LCDP-9084-301-x. If the unit fails to perform to
specifications, it must be removed and serviced by a qualified service facility.
6.0
Troubleshooting
6.1
Cleaning Method
The LCDP-9084-301-x should be cleaned when excessive dust or dirt
becomes apparent.
Use a twin pack cleaning system that employs a wet pad pre-moistened
with an Isopropyl Alcohol based cleaner/anti-static solution and a lint-free
drying cloth. DeCrane Aerospace Audio International recommends using
“Kleen & Dry” RR1205 manufactured by READ RIGHT, Nanuet, NY
10954.
Do not
use benzene, ammonia, thinner, or any other volatile
substance to clean the monitor or screen. These chemicals may
damage the screen or internal circuitry.
Do not
allow cleaner to puddle or pool around edges. Seepage may
damage internal circuitry.
DeCrane Aerospace Audio International’s recommended cleaning method
follows:
A. Turn off monitor.