DeCrane Aerospace Audio International
DVD-9101-201-x Installation & Operation Manual
Document # 540339, Rev B, 06/2009
Page 6 of 25
2.4.2 The unit can also be configured for Touch Screen or remote panel
control (i.e. entertainment control panels). The panels are on
DAAI’s RS-485 digital data bus system and configured to control
the operational features of the DVD-9101-201-x.
3.0
Installation
3.1
Preparation
3.1.1 Careful consideration of the location of this and all other
audio/visual modules is necessary. Some of the items to be
considered in the design and layout of the aircraft cabin include:
•
Space
•
Available power supply
•
Environmental conditions (temperature, humidity, etc.)
•
Length of cable runs
•
Location of other aircraft systems (oxygen delivery)
3.1.2 The DVD-9101-201-x shall
be installed to conform to the standards
designated by the customer, installing agency, and existing
conditions as to the unit location and type of installation.
3.1.3 Mounting screws are required to secure the unit. Mounting
provisions are provided via four (4) 10-32 UNF-2B threaded
mounting holes – two (2) on the left and right sides of unit. Refer to
Section 7.0, Reference Drawings, for illustrations.
3.1.4 The installing agency shall supply and fabricate all external cables
to the DVD-9101-201-x. The length and routing of external cables
shall be carefully studied and planned before attempting installation
of the unit. Allow adequate space for installation of cable and
connectors. Mating connectors are the responsibility of the
