DeCrane Aerospace Audio International
DVD-9101-201-x Installation & Operation Manual
Document # 540339, Rev B, 06/2009
Page 14 of 25
4.2
Control Functions:
EJECT BUTTON
The EJECT Button allows the user to eject the DVD. Pressing the EJECT Button
will allow the user to gently pull the DVD out of the mechanism.
PLAY BUTTON
The PLAY Button allows the user to begin or resume normal playback when the
DVD Player is in the following modes: Stop, Pause, Fast Forward, Fast Reverse,
Slow Forward, and Slow Reverse.
See the following pages for details on these
modes.
In lieu of remote or RS-485 commands, the user can press and hold the PLAY
Button for approximately five (5) seconds to access the DVD’s Media Menu. The
PLAY Button acts also as an "ENTER" Button when selecting menu options.
REVERSE SKIP BUTTON
During movie or audio play, press to skip to the beginning of the Previous
Chapter or Track. Press and hold for approximately one (1) second to enter
FAST REVERSE (x8) Mode. Also used to navigate (as Left curser) in DVD’s
Media Menu. Press and hold for approximately five (5) seconds to navigate as
Up curser in DVD’s Media Menu.
REVERSE BUTTON
(Not a front panel button. This feature is found on
remotes and data bus connected devices only)
The FAST/SLOW REVERSE Button is functionally dependent on the current
mode of the DVD Player, and the media type being played.
DVD VIDEO – FAST REVERSE:
This button is used during normal playback
mode.
Pressing the REVERSE Button once will place the DVD Player in FAST
REVERSE x2 Mode with no audio output.
Pressing the REVERSE Button a second time will place the DVD Player in
FAST REVERSE x4 Mode with no audio output.
