DeCrane Aerospace Audio International
DVD-9101-201-x Installation & Operation Manual
Document # 540339, Rev B, 06/2009
Page 3 of 25
DVD-9101-201-x
Serial Digital Video Disc Player
1.0
General Information
1.1
Introduction
This manual contains information for the proper installation and operation
of DeCrane Aerospace Audio International’s (DAAI) Digital Video Disc
Player, Model # DVD-9101-201-x. The “-x” suffix in the model number
designates the type of connector utilized; “-1” = Positronic and “-2” =
D-Subminiature. Also included are mechanical and electrical
characteristics of the unit.
1.2
Purpose of the Equipment
DeCrane Aerospace Audio International’s DVD-9101-201-x is a small
form-factor DVD Player compatible in size to current DeCrane Aerospace
Audio International Single-Disc Players.
The DVD-9101-201-x contains three (3) SDI video outputs and three (3)
AES-3 audio output channels. Audio, video, and control commands are
handled via DAAI’s RS-485 data bus. This device is designed to interface
with equipment containing DAAI Serial Digital video and AES-3 audio
equipment and is provided with power and ID strapping connections.
This unit incorporates four (4) ID strapping connections to allow up to 16
like units to operate concurrently on the same RS-485 serial data bus
segment independently of each other.
1.3
Operational Features
Supports standard commercial CD, DVD, and MP3 audio
Optional IR control
Three (3) SDI video outputs and three (3) AES-3 audio 2-channel
outputs or AES-3 audio 5.1 channel output
Supports all DVD region codes for international operation
Easy-to-use front panel controls
Up to 45 advanced functions available
Hand held remote or any DAAI data bus device for complete
system customization
Full range frequency response