21
Using for the first time
3. Use a suitable funnel in order to transfer the prepared material
into the paint tub without spilling any.
4. Screw the lid clockwise onto the paint tub in order to close the
paint tub again. Take care not to tilt the lid while screwing it on
and make sure that the paint tub is fully closed.
Attaching/replacing the spraying unit
Risk of injury!
Improper handling of the fine paint sprayer could result in injuries.
− Do not connect the fine paint sprayer to a power socket until the
required spraying unit has been fitted to the motor unit and the
paint has been filled in.
Fitting/removing the spraying unit to/from the motor unit
1. Swing down the safety catch (
18
) on the motor unit (
2
) as far
as possible (see
Fig. A
).
2. Insert the required spraying unit (
9
) or (
11
) into the motor
unit mount such that the line mark on the spraying unit points
to the line mark alongside the symbol on the motor unit (see
Fig. B
).
3. Then turn the motor unit clockwise through 90° as far as it will
go. The line mark on the spraying unit must point to the line mark
alongside the symbol on the motor unit.
4. Finally, you must swing up the safety catch (
18
) so that it en-
gages audibly in the cog on the spraying unit.
5. To dismantle the spraying unit (
9
) or (
11
) proceed in reverse
order.
Layout_DS_FSS_500_EX_UK_SPK7.indd 21
Layout_DS_FSS_500_EX_UK_SPK7.indd 21
19.11.2020 15:15:29
19.11.2020 15:15:29
