4
Preassemble the bottom cross support tube and brackets as shown
with ¼ “x 2 ¼”
bolts while leaving the nuts loose.
3)
Preassemble the Upper Deck Support as shown below with 4 1/2
”
nuts.
4)
Preassemble the Base Plates and Tires as shown below. The regular nut should be on
the inside and the serrated nut should be to the outside of the base plate. Take care
to tighten the bolt and nuts to allow the tire to spin freely but not be loose on the
bolt.
Use 2 ½” x 3 ¼” bolts with hex nut between tire and bracket
and flange nut on
outside of plate.
