12G-CROSS OPERATING MANUAL VERSION 1.0
Copyright © 2020 Decimator Design Pty Ltd, Sydney, Australia
E&OE
6
4. Scaling / Motion Det Level (Parameter)
The Motion Detection Level is the amount difference between frames to indicate motion.
A higher value is good for low moving video and a lower value is better for high motion video.
When the sub menu is highlighted, press the ENTER button to enter this sub-menu.
Press the < and > buttons to increase or decrease the unit in the cycle.
Default value is 32, Maximum limit is 1023.
5. Scaling / Horizontal Flip (Parameter)
This flips the image horizontally.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.)
No
2.)
Yes
6. Scaling / Vertical Flip (Parameter)
This flips the image vertically.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.)
No
2.)
Yes
Aspect:
(Has SUB-MENUs)
Aspect
SD IN ASPECT
4:3
Main Menu
<==
Sub Menu
Parameter Window
When highlighted in the Main Menu, press the ENTER button to enter this sub-menu.
Press the < and > buttons to move left or right respectively through the 4 menus below and press the BACK
button to go back to the Main Menu when finished.
The current value for each Sub Menu is shown in the Parameter Window.
1. Aspect / SD IN ASPECT (Parameter)
This option sets the aspect ratio of Standard definition input signals.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.)
4:3
2.)
14:9
3.)
16:9
2. Aspect / SD OUT ASPECT (Parameter)
This option sets the aspect ratio of Standard definition output signals.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.)
4:3
2.)
14:9
3.)
16:9
