Decatur Electronics Surface Velocity Radar SVR2-01, Руководство пользователя

Страница: 11 / 48

SV
R
2-
01
™
U
se
r’s
M
an
ua
l
11
Figure 3.3
Slide the battery door open .
3.4 Battery Installation
Insert the batteries into the battery holder following the polarity
guide that is on the inside of the battery holder (Figure 3 .4a .) Once
properly loaded the battery holder will look like the example in
Figure 3 .4b .
Figure 3.4b
Battery holder with batteries
Figure 3.4a
Battery holder
Notice that the negative side of each battery goes to the spring
contacts of the holder .
3.5 Inserting the Holder into the SVR ™
The battery holder is designed so that it can only make contact with
the power connections inside the gun if the holder is slid into the
gun in the correct way . If you look closely at the holder you will see
that there is a positive and negative terminal on it . These need to be
inserted into the gun with the terminals located at the top as shown
in Figure 3 .5 .