3. Stand Alone (manual) mode
In this mode, the Dip Switch 3 (4-digit Function Dip Switch) is flipped to the “OFF” position, and the Dip Switch
10(10-digit Addressing Dip Switch) to the “OFF” position. Flip the dip-switch 1~3(10-digit Addressing Dip Switch)
to set up fade time, the dip-switch 4~6 (10-digit Addressing Dip Switch) to select chase speed and the dip-
switch 7~9 (10-digit Addressing Dip Switch) to select built-in 8 patterns. Their details can be referred to the
below table;
4. IR control mode with DecaLED
®
Control Remote
In this mode, the Dip Switch3 (4-digit Function Dip Switch) is flipped to the “OFF” position and Dip Switch4 to
the “ON” position. It allows to set up work modes and relative parameters by operating LED Remote.
Note:
The DecaLED
®
Controller 3 Mini is available in being controlled by selecting built-in IR sensor or external
connected IR EYE sensor. If the user want to select external connected IR EYE sensor, the IR EYE sensor should
be connected properly before operation.
4.1.Connecting an external connected IR EYE sensor to the DecaLED
®
Controller 3 Mini
4.1.1 Before connecting, please isolate the main power.
4.1.2 Plug the external connected IR EYE sensor into the external IR EYE connector correctly.
4.1.3 Turn the main power on.
Note:
Once you’ve confirmed all work modes and relative parameters, you can remove the external connected
1.
IR EYE sensor.
NEVER remove the external connected IR EYE sensor when powering on for preventing from the
2.
damage.
4.2.Operation instructions
Before operation, make sure the batteries(3V, CR2025) have been installed properly.
There are 8 dedicated colour brightness pushbuttons (marked Red, Green, Blue, White, Cyan, Magenta,
Yellow, Amber). There are also the “AUTO” and the “UNIT SETTING” pushbuttons, as well as raise and lower keys
(marked “raise” and for “lower”) on the remote unit.
Detailed functions will be illustrated in the table on the next page.
4.2.Operation Instructions
4.2.1 Before operation, make sure the batteries(3V, CR2025) have been installed properly.
4.2.2 Operation Instructions
There are 8 dedicated color brightness keys(marked Red, Green, Blue, White, Cyan, Magenta, Yellow, Amber).
Also the "AUTO" and the "UNIT SETTING" keys, Up & Down keys(marked
for "Up" and
for "Down") are
on the remote controller as well.
The detailed functions are illustrated in the next table.
1).Once you've confirmed all work modes and relative parameters, you can remove the external connected IR EYE
sensor.
2).NEVER plug or unplug the external connected IR sensor when powering on for preventing from the damage.
Note:
LED Remote Cotroller
IR EYE Sensor
-Page 8-
3.Stand Alone(Manual)Mode
In this mode, the Dip Switch 11 (2
) is flipped to the "
" position, and the Dip Switch
10(
) to the "
" position. Flip the dip-switch 1~3(10-digit Addressing Dip Switch)
to set up fade time, the dip-switch 4~6 (10-digit Addressing Dip Switch) to select chase speed and the dip-switch
7~9 (10-digit Addressing Dip Switch) to select built-in 8 patterns. Their details can be referred to the below table;
-digit Function Dip Switch
OFF
10-digit Addressing Dip Switch
OFF
"0" = "OFF" position
"1" = "ON" position.
000
100
010
110
001
101
011
111
0%
100%
1 2 3
14%
28%
43%
57%
71%
86%
ON
OFF
1 =
0=
000
100
010
1
2
3
7 8 9
110
001
101
011
111
4
5
6
7
8
ON
OFF
1 =
0=
11 12
2-digit Function Dip Switch
10-digit Addressing Dip Switch
1 2
3
4
5
6
7
8
9 10
4 5 6
000
100
010
110
001
101
011
111
0.2S
0.5S
1S
5S
10S
20S
30S
ON
OFF
1 =
0=
0.1S
FADE TIME
SPEED
PROGRAM
4.IR Control Mode(with LED Remote Controller Operation)
In this mode, the Dip Switch11 (2
) is flipped to the "
" position and Dip Switch12 to
the "
" position. It allows to set up work modes and relative parameters by operating LED Remote Controller.
-digit Function Dip Switch
OFF
ON
Remark:
The DecaLED Controller 2 Mini for 12V is available in being controlled by selecting built-in IR sensor or external
connected IR EYE sensor. If the user want to select external connected IR EYE sensor, the IR EYE sensor should
be connected properly before operation.
11 12
2-digit Function Dip Switch
ON
OFF
1 =
0=
R
R
4.
4.1.1 Before connecting, please isolate the main power.
4.1.2 Plug the external connected IR EYE sensor into the external IR connector correctly.
4.1.3 Thus, turn the main power on.
1.Connecting an external connected IR EYE sensor to the DecaLED
Controller 2 Mini for 12V
3.Stand Alone(Manual)Mode
In this mode, the Dip Switch 3 (
4-digit Function Dip Switch
) is flipped to the "
OFF
" position, and the Dip Switch
10(
10-digit Addressing Dip Switch
) to the "
OFF
" position. Flip the dip-switch 1~3(10-digit Addressing Dip Switch)
to set up fade time, the dip-switch 4~6 (10-digit Addressing Dip Switch) to select chase speed and the dip-switch
7~9 (10-digit Addressing Dip Switch) to select built-in 8 patterns. Their details can be referred to the below table;
"0" = "OFF" position
"1" = "ON" position.
000
100
010
110
001
101
011
111
0%
100%
1 2 3
14%
28%
43%
57%
71%
86%
ON
OFF
1 =
0=
000
100
010
1
2
3
7 8 9
110
001
101
011
111
4
5
6
7
8
ON
OFF
1 =
0=
1 2
3
4
4-digit Function Dip Switch
10-digit Addressing Dip Switch
1 2
3
4
5
6
7
8
9 10
4 5 6
000
100
010
110
001
101
011
111
0.2S
0.5S
1S
5S
10S
20S
30S
ON
OFF
1 =
0=
0.1S
FADE TIME
SPEED
PROGRAM
4.IR Control Mode(with LED Remote Operation)
In this mode, the Dip Switch3 (
4-digit Function Dip Switch
) is flipped to the "
OFF
" position and Dip Switch4 to
the "
ON
" position. It allows to set up work modes and relative parameters by operating LED Remote.
4.2.Operation Instructions
4.2.1 Before operation, make sure the batteries(3V, CR2025) have been installed properly.
4.2.2 Operation Instructions
There are 8 dedicated color brightness pushbuttons(marked Red, Green, Blue, White, Cyan,
Magenta, Yellow, Amber). There are also the "AUTO" and the "UNIT SETTING" pushbuttons,
as well as Raise&Lower keys(marked for "raise" and for "lower") on the remote unit.
Their detailed functions will be illustrated in the next table.
LED Remote
4.
1.Connecting an external connected IR EYE sensor to the DecaLED Controller 1 for RGB modules
4.1.1 Before connecting, please isolate the main power.
4.1.2 Plug the external connected IR EYE sensor into the external IR EYE connector correctly.
4.1.3 Thus, turn the main power on.
Note:
1).Once you've confirmed all work modes and relative parameters, you can remove the external connected IR EYE
sensor.
2).NEVER remove the external connected IR EYE sensor when powering on for preventing from the damage.
Remark:
The DecaLED Controller 1 for RGB modules is available in being controlled by selecting built-in IR sensor or
external connected IR EYE sensor. If the user want to select external connected IR EYE sensor, the IR EYE sensor
should be connected properly before operation.
1 2
3
4
4-digit Function Dip Switch
ON
OFF
1 =
0=
R
R
IR EYE Sensor
-Page 10-
4.2.Operation Instructions
4.2.1 Before operation, make sure the batteries(3V, CR2025) have been installed properly.
4.2.2 Operation Instructions
There are 8 dedicated color brightness keys(marked Red, Green, Blue, White, Cyan, Magenta, Yellow, Amber).
Also the "AUTO" and the "UNIT SETTING" keys, Up & Down keys(marked
for "Up" and
for "Down") are
on the remote controller as well.
The detailed functions are illustrated in the next table.
1).Once you've confirmed all work modes and relative parameters, you can remove the external connected IR EYE
sensor.
2).NEVER plug or unplug the external connected IR sensor when powering on for preventing from the damage.
Note:
LED Remote Cotroller
IR EYE Sensor
-Page 8-
3.Stand Alone(Manual)Mode
In this mode, the Dip Switch 11 (2
) is flipped to the "
" position, and the Dip Switch
10(
) to the "
" position. Flip the dip-switch 1~3(10-digit Addressing Dip Switch)
to set up fade time, the dip-switch 4~6 (10-digit Addressing Dip Switch) to select chase speed and the dip-switch
7~9 (10-digit Addressing Dip Switch) to select built-in 8 patterns. Their details can be referred to the below table;
-digit Function Dip Switch
OFF
10-digit Addressing Dip Switch
OFF
"0" = "OFF" position
"1" = "ON" position.
000
100
010
110
001
101
011
111
0%
100%
1 2 3
14%
28%
43%
57%
71%
86%
ON
OFF
1 =
0=
000
100
010
1
2
3
7 8 9
110
001
101
011
111
4
5
6
7
8
ON
OFF
1 =
0=
11 12
2-digit Function Dip Switch
10-digit Addressing Dip Switch
1 2
3
4
5
6
7
8
9 10
4 5 6
000
100
010
110
001
101
011
111
0.2S
0.5S
1S
5S
10S
20S
30S
ON
OFF
1 =
0=
0.1S
FADE TIME
SPEED
PROGRAM
4.IR Control Mode(with LED Remote Controller Operation)
In this mode, the Dip Switch11 (2
) is flipped to the "
" position and Dip Switch12 to
the "
" position. It allows to set up work modes and relative parameters by operating LED Remote Controller.
-digit Function Dip Switch
OFF
ON
Remark:
The DecaLED Controller 2 Mini for 12V is available in being controlled by selecting built-in IR sensor or external
connected IR EYE sensor. If the user want to select external connected IR EYE sensor, the IR EYE sensor should
be connected properly before operation.
11 12
2-digit Function Dip Switch
ON
OFF
1 =
0=
R
R
4.
4.1.1 Before connecting, please isolate the main power.
4.1.2 Plug the external connected IR EYE sensor into the external IR connector correctly.
4.1.3 Thus, turn the main power on.
1.Connecting an external connected IR EYE sensor to the DecaLED
Controller 2 Mini for 12V
