MODE-5
Patch mode C&B of 2 outputs---->1 output (1x2 channels)
1 C&B mode: has 1 group with C&B output, which consists of 2 outputs that are controlled by 1 channels
(2 channels in total).
MODE-6
Patch mode colour of 1 output ---->1 output (1x1 channel)
1 COLOR mode: has1group with colour control, which consists of 2 outputs that are controlled by 1 channel
(1 channel in total). The brightness is always 100% in this mode.
Note:
The ‘Glide’ Effect function can be switched on(YES) or off(NO). The transition from one level to another is
1.
smoother when this function is switched on.
When this function is switched off, the lighting intensity will be changed from one level to another instantly.
2.
Thus, when a quick lighting effect is required, the ‘Glide’ effect function should be switched off.
If the DMX signal is interrupted, the driver will keep the last received DMX signal(information) until the driver
3.
is switched off or a new and valid DMX signal is sent.
When in link, the Slave will follow the Master, all parameter settings of each slave connected unit will be
4.
of no effect.
1.2.Master Control
AUTO mode and MANUAL mode are for Master Control. Relevant functions are as below:
AUTO mode:
1.
Preset programs:1-10 programs and “AUTO” program (“AUTO”program is the sequential running of these
presets.)
Auto Speed: 1~100. Auto Fadetime: 0%~100%.
MANUAL mode:
2.
BLUE Dimmer: 0%~100%., RED Dimmer: 0%~100%., GREEN Dimmer: 0%~100%.
Note:
The LEDs will light up red in Slave Control mode. The LEDs will give respond smoothly when the parameters
1.
are adjusted in Master Control.
If the LED is not selected in “Setup with answer”, it will light up red. If the LED is not selected in “Setup no
2.
answer”, it will switch off.
When the user confirms the settings of the LED products, the LEDs will strobe momentarily to confirm that the
setting have been saved.
1 C&B mode: has 1 group with C&B output, of which group consists of 2 outputs that are controlled by 1
channel(2 channels in total).
1
2
C & B
Color
Brightness
Group 1/
Output 1-2
Channel 1-2
1 COLOR mode: has 1 group with Color control. The brightness is always 100%, of which group consists of 2
outputs that are controlled by 1 channel(1 channel in total). The brightness is always 100% in this mode.
100%
1
C & B
Color
Brightness
Group 1/
Output 1-2
Channel 1
MODE-5
Patch mode C&B of 2 outputs---->1 output(1x2 channels)
MODE-6
Patch mode Color of 1 output---->1 output(1x1 channel)
NOTE:
1).The Glide Effect function can be switched on(YES) or off(NO). The transition from one level to another is
smoother when this function is switched on.
2).When this function is switched off, the lighting intensity will changed from one level to another abruptly.(thus,
when a quick lighting effect is required, the Guide Effect function should be switched off.)
3).If the DMX signal is interrupted, the driver will keep the last received DMX signal(information) until the driver
is switched off or a new and valid DMX signal is sent.
4).When in link, the Slave will follow the Master, all parameter settings of each slave connected unit will be of
no effect.
1.2.Master Control
(1) AUTO mode:
(2) MANUAL mode:
AUTO mode and MANUAL mode are for Master Control. Relevant functions are as below:
Preset programs:1-10 programs and "AUTO" program (
program is the sequential
running of these1-10 programs.)
"AUTO"
Auto Speed: 1~100.
Auto Fadetime: 0%~100%.
Blue/ Duration: 0%~100%.
Red/Speed:
.
0%~100%
Green/Dimmer:
.
0%~100%
NOTE:
1).The LEDs will turn red in Slave Control mode.
The LEDs will give responding sensitive when the parameters are adjusted in Master Control.
2).If the LED is not selected in "Setup with answer", it will turn red.
If the LED is not selected in "Setup no answer", it will switch off.
When the user confirms the settings of the LED products, the LEDs will flash momentarily to confirm that the
setting have been saved.
-Page 6-
1 C&B mode: has 1 group with C&B output, of which group consists of 2 outputs that are controlled by 1
channel(2 channels in total).
1
2
C & B
Color
Brightness
Group 1/
Output 1-2
Channel 1-2
1 COLOR mode: has 1 group with Color control. The brightness is always 100%, of which group consists of 2
outputs that are controlled by 1 channel(1 channel in total). The brightness is always 100% in this mode.
100%
1
C & B
Color
Brightness
Group 1/
Output 1-2
Channel 1
MODE-5
Patch mode C&B of 2 outputs---->1 output(1x2 channels)
MODE-6
Patch mode Color of 1 output---->1 output(1x1 channel)
NOTE:
1).The Glide Effect function can be switched on(YES) or off(NO). The transition from one level to another is
smoother when this function is switched on.
2).When this function is switched off, the lighting intensity will changed from one level to another abruptly.(thus,
when a quick lighting effect is required, the Guide Effect function should be switched off.)
3).If the DMX signal is interrupted, the driver will keep the last received DMX signal(information) until the driver
is switched off or a new and valid DMX signal is sent.
4).When in link, the Slave will follow the Master, all parameter settings of each slave connected unit will be of
no effect.
1.2.Master Control
(1) AUTO mode:
(2) MANUAL mode:
AUTO mode and MANUAL mode are for Master Control. Relevant functions are as below:
Preset programs:1-10 programs and "AUTO" program (
program is the sequential
running of these1-10 programs.)
"AUTO"
Auto Speed: 1~100.
Auto Fadetime: 0%~100%.
Blue/ Duration: 0%~100%.
Red/Speed:
.
0%~100%
Green/Dimmer:
.
0%~100%
NOTE:
1).The LEDs will turn red in Slave Control mode.
The LEDs will give responding sensitive when the parameters are adjusted in Master Control.
2).If the LED is not selected in "Setup with answer", it will turn red.
If the LED is not selected in "Setup no answer", it will switch off.
When the user confirms the settings of the LED products, the LEDs will flash momentarily to confirm that the
setting have been saved.
-Page 6-
