ProCheck
Appendix A: Compatible Sensors
35
Special Sensors
The following sensors are treated as special cases for the
ProCheck. When an ECH
2
O logger measures these sen-
sors. It uses a time-series date to make each measurement.
The ProCheck can only take instantaneous measurements
so the data measured by the ProCheck is different from a
logger.
•G1 Drain Gauge shows the percent full of the tip
reservoir.
•LWS (Leaf Wetness Sensor) shows the wetness status.
•Pressure Switch shows if the switch is open or shut.
•Davis Cup Anemometer shows cumulative cup rota
-
tions and wind vane angle.
NOTE: Decagon will release firmware updates for the
ProCheck to support any future ECH
2
O system sensors com-
patible with the ProCheck. These are available on Decagon’s
website at www.decagon.com/support/downloads and can be
installed by the end user.
