Debem KM70, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 37

6
KM70 ENG_DEBEM S.r.l.
Rev. 01A-EN 01/03/2021
1. Warranty
1.1 Warranty conditions
DEBEM S.r.l. warrants that its products (pumps and spare parts) are free from flaws and/or defects in
manufacturing and assembling for a period of 12 (twelve) months from the date of delivery (indicated on
the delivery note).
The purchaser's warranty is limited to the free replacement of parts recognized as defective, excluding
the buyer's right to request termination of the contract or price reduction, or other damages.
DEBEM S.r.l. warrants that the product sold is of good quality, material, and workmanship and agrees
to, during the warranty period specified herein, repair or replace at its own expense in the shortest amount
of time possible, those parts which due to poor quality of material or defect in workmanship or faulty
assembly prove to be defective.
The warranty is understood ex warehouse from where the supply was carried out, including the return of
defective parts.
The warranty validity period is:
12 months
from the date of delivery/shipment listed on the delivery note.
1.2 Warranty terms
For the warranty to remain fully valid throughout the period indicated in the warranty conditions it is
necessary that:
• construction and/or material flaws are reported in writing within 8 days of receipt of the goods;
• all contractual obligations of the buyer have been fulfilled. Alleged or confirmed product defects
do not justify non-fulfilment of contractual obligations;
• all installation operations, connection of the Product to energy networks (electric, water), use
and maintenance are carried out in strict compliance with the instructions included in the
Instruction Booklet or documentation provided with the product;
• all repairs are performed by personnel authorized by DEBEM S.r.l. and that all spare parts used
must be original spare parts.
The warranty does not cover:
• damages occurring during shipping and handling carried out by the buyer;
• pumping fluids that due to the nature or content are not compatible with the construction
materials and/or application limits prescribed in the order;
• incorrect selection caused by incorrect information provided by the buyer;
• incorrect or lack of maintenance;
• tampering, failed or improper execution of the prescribed requirements for putting into service;
• normal wear and tear related to the service conditions.