Debem KM70, Инструкция по установке, эксплуатации и обслуживанию

Страница: 13 / 37

13
KM70 ENG_DEBEM S.r.l.
Rev. 01A-EN 01/03/2021
2.6 Safety information for maintenance, inspection and installation
The instructions of this manual or of the contractual documentation must be strictly followed; if further
clarifications are needed, please contact DEBEM S.r.l.
Always purge the pump when used to pump harmful liquids (see section "Return to supplier" in the
chapter "Handling and storage").
Perform maintenance only when the pump is:
• stopped and in safety conditions (see the "Stop sequence" section in the chapter "Starting and
stopping")
• cooled to room temperature
• not under pressure
The pump maintenance, inspection and installation personnel must be specialised and qualified, as well
as informed of the content of this manual.
Any modification to the pump is allowed only after prior authorisation by DEBEM S.r.l.
Use only genuine spare parts or spare parts authorised by DEBEM S.r.l. Any damage due to using non
genuine spare parts voids any liability by DEBEM S.r.l.
Immediately after maintenance all safety and protection devices must be reassembled and activated (see
the sections "Pre-start checklist" and "Start sequence" in the chapter "Starting and stopping").
AVOID ANY INCORRECT OR IMPROPER ACTION