Deagostini MODEL SPACE Lamborghini Countach LP 500S, Инструкция по сборке

Страница: 17 / 28

464
Lamborghini Countach LP 500S
Collect all of the cables together and secure them to the
circuit board with masking tape, as shown above. The
cables just need to be held together, so they don’t need to
be tightly taped.
Lift the underbody and align the points
identified in the previous step with those
on the main body. Move the cables out of
the way so that they don’t get trapped.
13
16
12
15
This is how all the cables should now look. Make sure to
check that all of the cables match correctly and that the
connectors are firmly engaged.
Locate the mounting holes and posts of the main body and the underbody
(blue circles). Hold the cables out of the way with some masking tape. You will
need to align the red-outlined parts of the steering and the engine.
11
14
First, connect the battery box cable (red + black) and the
ignition key cylinder cable ( orange), coming from
the main body, to the corresponding connectors coming
from the circuit board. Then connect the remaining cables
from the main body to the circuit board.
Slide the power switch to the ON position. This should start
the engine sound. If it doesn’t, check the connections from
the battery, the speaker and the main switch, and make sure
that the batteries are inserted the right way round. Turn the
switch to the OFF position after testing the sound.