Deagostini MODEL SPACE Lamborghini Countach LP 500S, Инструкция по сборке

Страница: 11 / 28

458
Lamborghini Countach LP 500S
Tighten a 2.6 × 5mm screw with washer
into the hole in the right side of the front
fender to secure the right door to it.
15
Align the holes of door lock part B (Stage
74 or 77) with the pin and hole in the
front fender, ahead of the left door.
16
Repeat Steps 16 and 17 to fit the
remaining door lock part B on the right
side of the fender, and secure it with a 2.6
× 5mm screw with washer. Turn the front fender over and remove
the masking tape from the headlamps.
Raise the headlamps by lowering the bar
behind the front compartment, and
temporarily secure it in that position with
masking tape.
Tighten the screw into the hole, while
holding the left door in place.
Tighten a 2.6 × 5mm screw with washer
(Stage 74) into the rear hole in door
lock part B.
Turn the front fender over while holding
the left and right doors in place. Insert a
2.6 × 5mm screw with washer (Stage 74)
into the hole indicated (inset).
18 19
14
17
13
As the final parts of your model’s
sub-assemblies are now coming
together, ensure that you take extra
care when handling them, because
while the sections may be large, they
are still delicate.
CAUTION