De Vielle DEF963739, Инструкция по эксплуатации

Страница: 8 / 12

8
WARNING: THIS IS A DOUBLE SIDED
HEATER. Keep all objects at least 1 metre
from the front, sides and rear of the
appliance.
WARNING: In order to avoid overheating or
risk of fire, do not cover the heater.
WARNING: Never leave this appliance
unattended when in use.
WARNING: Do not use this appliance with a
programmer, remote-control system,
separate timer or any other device that
switches the appliance on automatically.
Note: When the appliance is turned on for the
first time, it may release a slight odour or
smoke. This odour or smoke is a normal
occurrence caused by the initial heating of
the internal heating elements and should not
occur again.
HEAT CONTROL SWITCH
Check that the Power Switch on the side of the
heater is set to the Off position before plugging
the heater in and turning on the mains supply.
Turn the Power Switch at the side of the heater
to the “I” position. You will hear a beep.
Always choose a safe location for the appliance, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit
before use. This appliance requires no installation, it should be used solely as a
portable appliance.
Operating your Appliance
Fahrenheit/Celsius
On/Off
Timer
Turbo Fan
Increase Temperature
Working Mode
CONTROL PANEL
Decrease Temperature
CONTROL PANEL
Press the On/Off button on the Control
Panel to turn the heater on.
The LCD will display the current room
temperature and the set temperature.
Select the desired temperature by pressing the
Increase or Decrease Temperature buttons.
The heater operates between 5
°
C and 37
°
C.
(The Working Mode button must be pressed to
display 1000W/1300W or 2300W to generate
heat.) Please note: Once the ‘room’
temperature is equal to or greater than the ‘set’
temperature, the heater will stop generating
heat.
Press the Working Mode button to select
either 1000W, 1300W, 2300W or Prevent Frost.
Prevent Frost is for cooler climates where
the temperature may drop below 5
°
C. Once this
temperature is reached, if Prevent Frost is
selected, the heater will start generating heat
until it reaches the Set Temperature at which
time it will stop generating heat.
Press the Turbo Fan button to increase
heat output. The fan remains at the same
speed; only the element changes to create the
greater/lesser heat output. Press again to turn
off.
WARNING: THIS IS A DOUBLE SIDED
HEATER. Keep all objects at least 1 metre
from the front, sides and rear of the
appliance.
WARNING: In order to avoid overheating or
risk of fire, do not cover the heater.
WARNING: Never leave this appliance
unattended when in use.
WARNING: Do not use this appliance with a
programmer, remote-control system,
separate timer or any other device that
switches the appliance on automatically.
Note: When the appliance is turned on for the
first time, it may release a slight odour or
smoke. This odour or smoke is a normal
occurrence caused by the initial heating of
the internal heating elements and should not
occur again.
HEAT CONTROL SWITCH
Check that the Power Switch on the side of the
heater is set to the Off position before plugging
the heater in and turning on the mains supply.
Turn the Power Switch at the side of the heater
to the “I” position. You will hear a beep.
Always choose a safe location for the appliance, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit
before use. This appliance requires no installation, it should be used solely as a
portable appliance.
Operating your Appliance
Fahrenheit/Celsius
On/Off
Timer
Turbo Fan
Increase Temperature
Working Mode
CONTROL PANEL
Decrease Temperature
CONTROL PANEL
Press the On/Off button on the Control
Panel to turn the heater on.
The LCD will display the current room
temperature and the set temperature.
Select the desired temperature by pressing the
Increase or Decrease Temperature buttons.
The heater operates between 5 ° C and 37 ° C.
(The Working Mode button must be pressed to
display 1000W/1300W or 2300W to generate
heat.) Please note: Once the ‘room’
temperature is equal to or greater than the ‘set’
temperature, the heater will stop generating
heat.
Press the Working Mode button to select
either 1000W, 1300W, 2300W or Prevent Frost.
Prevent Frost is for cooler climates where
the temperature may drop below 5 ° C. Once this
temperature is reached, if Prevent Frost is
selected, the heater will start generating heat
until it reaches the Set Temperature at which
time it will stop generating heat.
Press the Turbo Fan button to increase
heat output. The fan remains at the same
speed; only the element changes to create the
greater/lesser heat output. Press again to turn
off.
WARNING: THIS IS A DOUBLE SIDED
HEATER. Keep all objects at least 1 metre
from the front, sides and rear of the
appliance.
WARNING: In order to avoid overheating or
risk of fire, do not cover the heater.
WARNING: Never leave this appliance
unattended when in use.
WARNING: Do not use this appliance with a
programmer, remote-control system,
separate timer or any other device that
switches the appliance on automatically.
Note: When the appliance is turned on for the
first time, it may release a slight odour or
smoke. This odour or smoke is a normal
occurrence caused by the initial heating of
the internal heating elements and should not
occur again.
HEAT CONTROL SWITCH
Check that the Power Switch on the side of the
heater is set to the Off position before plugging
the heater in and turning on the mains supply.
Turn the Power Switch at the side of the heater
to the “I” position. You will hear a beep.
Always choose a safe location for the appliance, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit
before use. This appliance requires no installation, it should be used solely as a
portable appliance.
Operating your Appliance
Fahrenheit/Celsius
On/Off
Timer
Turbo Fan
Increase Temperature
Working Mode
CONTROL PANEL
Decrease Temperature
CONTROL PANEL
Press the On/Off button on the Control
Panel to turn the heater on.
The LCD will display the current room
temperature and the set temperature.
Select the desired temperature by pressing the
Increase or Decrease Temperature buttons.
The heater operates between 5 ° C and 37 ° C.
(The Working Mode button must be pressed to
display 1000W/1300W or 2300W to generate
heat.) Please note: Once the ‘room’
temperature is equal to or greater than the ‘set’
temperature, the heater will stop generating
heat.
Press the Working Mode button to select
either 1000W, 1300W, 2300W or Prevent Frost.
Prevent Frost is for cooler climates where
the temperature may drop below 5 ° C. Once this
temperature is reached, if Prevent Frost is
selected, the heater will start generating heat
until it reaches the Set Temperature at which
time it will stop generating heat.
Press the Turbo Fan button to increase
heat output. The fan remains at the same
speed; only the element changes to create the
greater/lesser heat output. Press again to turn
off.
WARNING: THIS IS A DOUBLE SIDED
HEATER. Keep all objects at least 1 metre
from the front, sides and rear of the
appliance.
WARNING: In order to avoid overheating or
risk of fire, do not cover the heater.
WARNING: Never leave this appliance
unattended when in use.
WARNING: Do not use this appliance with a
programmer, remote-control system,
separate timer or any other device that
switches the appliance on automatically.
Note: When the appliance is turned on for the
first time, it may release a slight odour or
smoke. This odour or smoke is a normal
occurrence caused by the initial heating of
the internal heating elements and should not
occur again.
HEAT CONTROL SWITCH
Check that the Power Switch on the side of the
heater is set to the Off position before plugging
the heater in and turning on the mains supply.
Turn the Power Switch at the side of the heater
to the “I” position. You will hear a beep.
Always choose a safe location for the appliance, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit
before use. This appliance requires no installation, it should be used solely as a
portable appliance.
Operating your Appliance
Fahrenheit/Celsius
On/Off
Timer
Turbo Fan
Increase Temperature
Working Mode
CONTROL PANEL
Decrease Temperature
CONTROL PANEL
Press the On/Off button on the Control
Panel to turn the heater on.
The LCD will display the current room
temperature and the set temperature.
Select the desired temperature by pressing the
Increase or Decrease Temperature buttons.
The heater operates between 5
°
C and 37
°
C.
(The Working Mode button must be pressed to
display 1000W/1300W or 2300W to generate
heat.) Please note: Once the ‘room’
temperature is equal to or greater than the ‘set’
temperature, the heater will stop generating
heat.
Press the Working Mode button to select
either 1000W, 1300W, 2300W or Prevent Frost.
Prevent Frost is for cooler climates where
the temperature may drop below 5
°
C. Once this
temperature is reached, if Prevent Frost is
selected, the heater will start generating heat
until it reaches the Set Temperature at which
time it will stop generating heat.
Press the Turbo Fan button to increase
heat output. The fan remains at the same
speed; only the element changes to create the
greater/lesser heat output. Press again to turn
off.
WARNING: THIS IS A DOUBLE SIDED
HEATER. Keep all objects at least 1 metre
from the front, sides and rear of the
appliance.
WARNING: In order to avoid overheating or
risk of fire, do not cover the heater.
WARNING: Never leave this appliance
unattended when in use.
WARNING: Do not use this appliance with a
programmer, remote-control system,
separate timer or any other device that
switches the appliance on automatically.
Note: When the appliance is turned on for the
first time, it may release a slight odour or
smoke. This odour or smoke is a normal
occurrence caused by the initial heating of
the internal heating elements and should not
occur again.
HEAT CONTROL SWITCH
Check that the Power Switch on the side of the
heater is set to the Off position before plugging
the heater in and turning on the mains supply.
Turn the Power Switch at the side of the heater
to the “I” position. You will hear a beep.
Always choose a safe location for the appliance, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit
before use. This appliance requires no installation, it should be used solely as a
portable appliance.
Operating your Appliance
Fahrenheit/Celsius
On/Off
Timer
Turbo Fan
Increase Temperature
Working Mode
CONTROL PANEL
Decrease Temperature
CONTROL PANEL
Press the On/Off button on the Control
Panel to turn the heater on.
The LCD will display the current room
temperature and the set temperature.
Select the desired temperature by pressing the
Increase or Decrease Temperature buttons.
The heater operates between 5
°
C and 37
°
C.
(The Working Mode button must be pressed to
display 1000W/1300W or 2300W to generate
heat.) Please note: Once the ‘room’
temperature is equal to or greater than the ‘set’
temperature, the heater will stop generating
heat.
Press the Working Mode button to select
either 1000W, 1300W, 2300W or Prevent Frost.
Prevent Frost is for cooler climates where
the temperature may drop below 5
°
C. Once this
temperature is reached, if Prevent Frost is
selected, the heater will start generating heat
until it reaches the Set Temperature at which
time it will stop generating heat.
Press the Turbo Fan button to increase
heat output. The fan remains at the same
speed; only the element changes to create the
greater/lesser heat output. Press again to turn
off.
WARNING: THIS IS A DOUBLE SIDED
HEATER. Keep all objects at least 1 metre
from the front, sides and rear of the
appliance.
WARNING: In order to avoid overheating or
risk of fire, do not cover the heater.
WARNING: Never leave this appliance
unattended when in use.
WARNING: Do not use this appliance with a
programmer, remote-control system,
separate timer or any other device that
switches the appliance on automatically.
Note: When the appliance is turned on for the
first time, it may release a slight odour or
smoke. This odour or smoke is a normal
occurrence caused by the initial heating of
the internal heating elements and should not
occur again.
HEAT CONTROL SWITCH
Check that the Power Switch on the side of the
heater is set to the Off position before plugging
the heater in and turning on the mains supply.
Turn the Power Switch at the side of the heater
to the “I” position. You will hear a beep.
Always choose a safe location for the appliance, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit
before use. This appliance requires no installation, it should be used solely as a
portable appliance.
Operating your Appliance
Fahrenheit/Celsius
On/Off
Timer
Turbo Fan
Increase Temperature
Working Mode
CONTROL PANEL
Decrease Temperature
CONTROL PANEL
Press the On/Off button on the Control
Panel to turn the heater on.
The LCD will display the current room
temperature and the set temperature.
Select the desired temperature by pressing the
Increase or Decrease Temperature buttons.
The heater operates between 5 ° C and 37 ° C.
(The Working Mode button must be pressed to
display 1000W/1300W or 2300W to generate
heat.) Please note: Once the ‘room’
temperature is equal to or greater than the ‘set’
temperature, the heater will stop generating
heat.
Press the Working Mode button to select
either 1000W, 1300W, 2300W or Prevent Frost.
Prevent Frost is for cooler climates where
the temperature may drop below 5
°
C. Once this
temperature is reached, if Prevent Frost is
selected, the heater will start generating heat
until it reaches the Set Temperature at which
time it will stop generating heat.
Press the Turbo Fan button to increase
heat output. The fan remains at the same
speed; only the element changes to create the
greater/lesser heat output. Press again to turn
off.
Operating your Appliance
Please note, when first activated, the temperature
must be set at least 4°C higher than the room
temperature in order for the heating element to
operate.