manualshive.com logo in svg

De La Rue 2800 Series, Руководство пользователя

Поделиться
Скачать
De La Rue 2800 Series Скачать руководство пользователя страница 29

Advanced functions

29

cull and face

When the pack is finished:

Remove notes from the top tray.  Check
them for improper denominations or other
errors.

Place notes that may belong to the bottom
tray back into the top tray and run them
again to verify true errors.

Note: 

 If you remove notes from the bot-

tom tray first, the top tray yellow L

ED

flashes and the beeper sounds.   This is
to remind you to remove and examine
these notes.  Also, the 

START 

button

must then be pressed to begin the next
count.

When this is complete, remove all notes
from the top.  Any remaining error notes
must be placed aside to be checked.

Remove counted notes from the bottom tray.

The count total shows the value ($000) of all
notes in the bottom tray.

Note facing detects and separates U.S.

Note facing detects and separates U.S.

Note facing detects and separates U.S.

Note facing detects and separates U.S.

Note facing detects and separates U.S.
curr

curr

curr

curr

currency that is not faced the same way

ency that is not faced the same way

ency that is not faced the same way

ency that is not faced the same way

ency that is not faced the same way.....

The face up notes (portrait side up) are fed to
the bottom tray, notes that are not portrait side
up (green side up) off-sort to the top tray.

Dual pocket facing is operable in the value or
piece count modes and is the default mode.
The count total is the sum of notes in both the
top and bottom trays.

6

5

cull mode...

facing notes

Rogue

Value

Cull

Total

Sort

Face

dual pocket

1

Содержание 2800 Series

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды