manualshive.com logo in svg

De La Rue 2800 Series, Руководство пользователя

Поделиться
Скачать
De La Rue 2800 Series Скачать руководство пользователя страница 24

Basic operating functions

24

When a size suspect is detected:

• Counting immediately stops.

• The tray L

ED

 with the size suspect flashes

yellow.

• The beeper sounds.

• Size flashes on the display.

To examine the size suspect:

Examine the last two notes fed into the
tray having the flashing yellow L

ED

 and

remove the suspect (the note that is either
under or oversized).

Examine the size suspect and:

If acceptable –
Return the note to the tray from which it
was taken (the one having the flashing
yellow L

ED

).

The count total remains accurate.

Press 

START 

to continue the count.

If not acceptable –
Place the suspect note aside.

Empty the error tray having the flashing
yellow L

ED

 and place all notes back into

the feed tray.

Press 

START 

to recount the pack.

Remember, the count total is the sum of both
the top and bottom trays.  When the error tray
is emptied, the machine subtracts the amount
of notes in that tray from the count total when

START 

is pressed to begin the recount.

dual pocket

1

2

3

size detection

Содержание 2800 Series

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды