manualshive.com logo in svg

De La Rue 2800 Series, Руководство пользователя

Поделиться
Скачать
De La Rue 2800 Series Скачать руководство пользователя страница 11

Introduction

11

The 

2800VB 

series currency counters offer:

• mixed denomination value balancing

• rogue denomination off-sort based on the

first note through

• operator selected denomination off-sorts

using the cull mode

• non-stop sorting of old and new style

currency

• non-stop facing 

- 

notes feeding portrait

side down (face down or green side up)
versus notes feeding portrait side up
(face up)

• non-stop orientation of notes

2800VB 

series counters easily convert to a

standard currency counter (single pocket
mode, piece count) to count and batch paper
currency, USDA food coupons, checks and
other similar documents within machine
specifications.  In the single pocket mode,
good notes are fed to the bottom tray; error

*

notes are fed to the top tray for examination by
the machine operator.

* Error Note -  is a note that is different from the
rest of the pack, such as a counterfeit suspect,
a half note, a size suspect, or a double note.

The temperature of the area where the machine
is operated should range between 65° and
85° F (18° and 29°C), with a relative humidity
range of 35% to 85%, non-condensing.

When choosing a location for the machine,
avoid areas with drafts, excessive vibrations,
and direct exposure to bright sunlight and heat
sources.

If you see any sign of damage, immediately
notify the shipping company and your
authorized sales office.

Check that all accessories or options ordered
were shipped with the machine.  Replace-
ments are available through your authorized
sales or service office.

installing the counter

to begin

Содержание 2800 Series

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды