Depth P
er
ception Apparatus // User´s manual
Depth P
er
ception Apparatus // User´s manual
32
33
PROCEDURE
// OPERATING
Press START/STOP button.
The equipment state (S) changes from Stop
(STP) to Calibration (CAL).
If the rod is not at zero position (0) or if not aligned with the fixed rod indicator,
the system will need a self-calibration to zero position (0).
This has to be done at the beginning of each test trial .
a.
b.
MANUAL MODE
2
Calibration.
Selection moving rod position.
Start / Stop
Ts:m
Tr:2
D:0.00
S:CAl
T:0
Press START/STOP button.
The equipment state (S) changes from Stop
(STP) to Select (SLCT).
In the case when the distance is zero (0) or the indicators are aligned, system will
not need to calibrate. System will start immeditely.
Start / Stop
Ts:m
Tr:2
D:0.00
S:SLCT
T:0
Use the joystick control to slide the rod
FORTH to the desired position.
Use the joystick control to slide the rod
BACK to the desired position.
Distance (D) will show the distance
of the moving rod in reference to the
static rod position.
Distance (D) will show the distance
of the moving rod in reference to the
static rod position.
a.
b.
Ts:m
Tr:2
D:2.56
S:SLCT
T:0
Ts:m
Tr:2
D:-2.56
S:SLCT
T:0
