Depth P
er
ception Apparatus // User´s manual
Depth P
er
ception Apparatus // User´s manual
30
31
PROCEDURE
// OPERATING
SELECT THE KIND OF TEST.
SELECT THE TRIAL MEMORY
LOCATION
1
2
Press the LEFT button to choose
Manual Mode (M)
By pressing UP or DOWN buttons,
you can select one of the 10
posible location to store the data.
Press the RIGHT button to choose
Automatic Mode (A)
Once the device has been plugged and
turned ON, follow these steps.
Once test mode has been selected, you
should select the position to store the data
of each test. Follow this steps:
a.
a.
b.
Up
Down
Right
Left
The manual test allows
the researcher to
manually adjust the
distance from which he/
she will set the starting
point of the rod for depth
perception evaluation.
The equipment has
20 memory locations,
ten (10) correspond
to manual mode and
ten (10) for automatic
mode. These positions
go from zero (0) to (9)
in either of the two
modes.
You can store distance
(D) and time (T)
information acquired
during the performed
test in any of the ten
(10) memory positions
that are independent
for each mode.
Manual Test // Automatic Test
Ts:M
Tr:0
D:0.00
S:STP
T:0
Ts:a
Tr:0
D:0.00
S:STP
T:0
The automatic test the
equipment automatically
adjusts the distance for
the depth perception
evaluation. In this mode
you can select up to ten
(10) different distances
presented by the
manufacturer.
Ts:M
Tr:2
D:0.00
S:STP
T:0
Please note that if you do not change location number each time that a
new test starts, the information will be rewritten in the same location.
To avoid that, each time that you end a test, change the location
number to prevent data lost.
